Spring Reverb Stomp Box / Stage Center Reverb

Stage Center Reverb Bill of Materials

Resistor ((1/4 watt rating)

2 - 4.7k
1 - 10k
1 - 22k
1 - 33k
1 - 47k
1 - 470k
1 - 1M
1 - 2.2M


Pots
2 - 50k log can be linear or log (audio) taper.

Capacitors (minimum 16 volt rating)
1 - 220pF
1 - 0.01uF
2 - 0.02uF
3 - 0.22uF
2 - 39uF

Op Amp
1 - TL074


Other

Reverb Springs - Input Impedance of 310 Ohms (Accutronics 4DB2C1D)
Reverb Springs Bag (optional)

2 - cables with RCA jacks on both ends. These are used to connect the reverb springs to the circuit.

1 - 3PDT or DPDT heavy duty foot switch
2 - 1N4001 diodes
1 - 14 pin op amp socket (optional)
1 - Stereo Quarter inch Jack (input)
1 - Mono quarter inch jacks (output)
2 - RCA female jacks
2 - 9v battery snaps & holder and/or DC jack(s)
Copper-clad board, etchant, 24 gauge stranded wire
Enclosure