A large online repository or library of guitar pedal schematics, layouts, PCB transfers, and tagboard layouts. All rights reserved to respective owner(s) - not for profit / for educational purposes ONLY.
I am building a cabinet switching foot pedal with a "make before break" circuit so the amp always sees a load. I have some 9 pin or 3PDT push button footswitches and want to wire it so one cab is "up" and the other is "down" switchwise and has a 100 Ohm resistor in place..any thoughts?
Ciao! How can l do to connect a 3 or maybe 4pdt switch for stereo output? I'm doing a stereo chorus pedal that has a mono input and a stereo output. How wiring the switch?!
Hi is the a correct way the switch is meant to go so 9 pins does it have an order or can it be connected from any side?
ReplyDeleteThere are several ways to wire a 3PDT switch w/ LED ... I have been doing mine with a different layout that grounds 3 of the lugs.
DeleteLook at the top of this page, the beige background 3PDT switch. This is the wiring layout I use now for my builds.
DeleteI am building a cabinet switching foot pedal with a "make before break" circuit so the amp always sees a load. I have some 9 pin or 3PDT push button footswitches and want to wire it so one cab is "up" and the other is "down" switchwise and has a 100 Ohm resistor in place..any thoughts?
ReplyDeleteCiao! How can l do to connect a 3 or maybe 4pdt switch for stereo output? I'm doing a stereo chorus pedal that has a mono input and a stereo output. How wiring the switch?!
ReplyDelete