Switch / Effect Wiring - DPDT, 3PDT, SPDT Switching

3PDT Wiring / DPDT Wiring






3PDT Switch, DC Jack & LED - Guitar Pedal Switching




3PDT Switch, No DC Jack & LED - Guitar Pedal Switching





DPDT Guitar Pedal Switching





DPDT Guitar Pedal Switching with Millenium Bypass





SPDT Guitar Pedal Wiring / Switch - non-true bypass





A/B Switch Wiring - 3PDT Switch - Guitar Pedal





True Bypass Looper / Volume Control




2 FX in the same box





Simple FX Box Wiring

5 comments:

  1. clintApril 4, 2018 at 1:12 AM

    Hi is the a correct way the switch is meant to go so 9 pins does it have an order or can it be connected from any side?

    ReplyDelete
    Replies
    1. Kyle O'HareJuly 18, 2018 at 9:04 PM

      There are several ways to wire a 3PDT switch w/ LED ... I have been doing mine with a different layout that grounds 3 of the lugs.

      Delete
    2. Kyle O'HareJuly 18, 2018 at 9:07 PM

      Look at the top of this page, the beige background 3PDT switch. This is the wiring layout I use now for my builds.

      Delete
  2. UnknownJune 12, 2019 at 11:41 AM

    I am building a cabinet switching foot pedal with a "make before break" circuit so the amp always sees a load. I have some 9 pin or 3PDT push button footswitches and want to wire it so one cab is "up" and the other is "down" switchwise and has a 100 Ohm resistor in place..any thoughts?

    ReplyDelete
  3. UnknownMarch 6, 2021 at 3:33 AM

    Ciao! How can l do to connect a 3 or maybe 4pdt switch for stereo output? I'm doing a stereo chorus pedal that has a mono input and a stereo output. How wiring the switch?!

    ReplyDelete

Subscribe to: Posts (Atom)